Mechanical properties of microcellular and nanocellular silicone rubber foams obtained by supercritical carbon dioxide


Zhang A, Zhang Q, Bai H, Li L, Li J. Polymeric nanoporous supplies fabricated with supercritical CO2 and CO2-expanded liquids. Chem Soc Rev. 2014;43:6938–53.


Costeux S. CO2‐blown nanocellular foams. J Appl Polym Sci. 2014;131:1–16.


Forest C, Chaumont P, Cassagnau P, Swoboda B, Sonntag P. Polymer nano-foams for insulating functions ready from CO2 foaming. Prog Polym Sci. 2015;41:122–45.


Realinho V, Antunes M, Martínez AB, Velasco JI. Affect of nanoclay focus on the CO2 diffusion and bodily properties of PMMA montmorillonite microcellular foams. Ind Eng Chem Res. 2011;50:13819–24.


Zhai W, Yu J, Wu L, Ma W, He J. Heterogeneous nucleation uniformizing cell measurement distribution in microcellular nanocomposites foams. Polymer. 2006;47:7580–9.


Siripurapu S, De Simone JM, Khan SA, Spontak RJ. Managed foaming of polymer movies by way of restricted floor diffusion and the addition of nanosilica particles or CO2-philic surfactants. Macromolecules. 2005;38:2271–80.


Yokoyama H, Sugiyama Ok. Nanocellular buildings in block copolymers with CO2-philic blocks utilizing CO2 as a blowing agent: crossover from micro- to nanocellular buildings with depressurization temperature. Macromolecules. 2005;38:10516–22.


Taki Ok, Waratani Y, Ohshima M. Preparation of nanowells on a PS-b-PMMA copolymer skinny movie by CO2 remedy. Macromol Mater Eng. 2008;293:589–97.


Ruiz JAR, Cloutet E, Dumon M. Investigation of the nanocellular foaming of polystyrene in supercritical CO2 by including a CO2‐philic perfluorinated block copolymer. J Appl Polym Sci. 2012;126:38–45.


Liu B, Wang P-C, Ao Y-Y, Zhao Y, An Y, Chen H-B, et al. Results of mixed neutron and gamma irradiation upon silicone foam. Radiat Phys Chem. 2017;133:31–6.


Yue Y, Zhang H, Zhang Z, Chen Y. Polymer–filler interplay of fumed silica crammed polydimethylsiloxane investigated by certain rubber. Compos Sci Technol. 2013;86:1–eight.


Wen J, Li Y, Zuo Y, Zhou G, Li J, Jiang L, et al. Preparation and characterization of nano-hydroxyapatite/silicone rubber composite. Mater Lett. 2008;62:3307–9.


Landrock AH. Glossary – Handbook of plastic foams, Manufacture and Functions (Elsevier, Expertise & Engineering, Park Ridge), 456–481 (1995).


Chen H-B, Liu B, Huang W, Wu W-H. Gamma radiation induced results of compressed silicone foam. Polym Degrad Stab. 2015;114:89–93.


Fang H, Li J, Chen H, Liu B, Huang W, Liu Y, et al. Radiation induced degradation of silica bolstered silicone foam: experiments and modeling. Mech Mater. 2017;105:148–56.


Liu P, Liu D, Zou H, Fan P, Xu W. Construction and properties of closed-cell foam ready from irradiation crosslinked silicone rubber. J Appl Polym Sci. 2009;113:3590–5.


Grande JB, Fawcett AS, Mclaughlin AJ, Gonzaga F, Bender TP, Brook MA. Anhydrous formation of foamed silicone elastomers utilizing the Piers–Rubinsztajn response. Polymer. 2012;53:3135–42.


Hong I-Ok, Lee S. Microcellular foaming of silicone rubber with supercritical carbon dioxide. Korean J Chem Eng. 2013;31:166–71.


Music L, Lu A, Feng P, Lu Z. Preparation of silicone rubber foam utilizing supercritical carbon dioxide. Mater Lett. 2014;121:126–eight.


Liao X, Xu H, Li S, Zhou C, Li G, Park CB. The results of viscoelastic properties on the mobile morphology of silicone rubber foams generated by supercritical carbon dioxide. RSC Adv. 2015;5:106981–eight.


Xu H, He Y, Liao X, Luo T, Li G, Yang Q, et al. A inexperienced and structure-controlled method to the technology of silicone rubber foams by the use of carbon dioxide. Cell Polym. 2016;35:19–32.


Yan H, Wang Ok, Zhao Y. Fabrication of silicone rubber foam with tailor-made porous buildings by supercritical CO2. Macromol Mater Eng. 2016;302:1600377.


Yang Q, Yu H, Music L, Lei Y, Zhang F, Lu A, et al. Stable-state microcellular excessive temperature vulcanized (HTV) silicone rubber foam with carbon dioxide. J Appl Polym Sci. 2017;134:44807.


Chandra A, Gong S, Yuan M, Turng LS, Gramann P, Cordes H. Microstructure and crystallography in microcellular injection‐molded polyamide‐6 nanocomposite and neat resin. Polym Eng Sci. 2005;45:52–61.


Yang J, Huang L, Zhang Y, Chen F, Fan P, Zhong M, et al. Nucleating agent for polymer foaming: functions of ordered mesoporous silica particles in polymethyl methacrylate supercritical carbon dioxide microcellular foaming. Ind Eng Chem Res. 2013;52:14169–78.


Sheng SJ, Hu X, Wang F, Ma QY, Gu MF. Mechanical and thermal property characterization of poly-l-lactide (PLLA) scaffold developed utilizing pressure-controllable inexperienced foaming know-how. Mater Sci Eng C. 2015;49:612.


Yu P, Mi HY, Huang A, Geng LH, Chen BY, Kuang TR. et al. Impact of poly(butylenes succinate) on poly(lactic acid) foaming conduct: formation of open cell construction. Ind Eng Chem Res. 2015;54:6199–6207.


Zhou C, Vaccaro N, Sundarram SS, Li W. Fabrication and characterization of polyetherimide nanofoams utilizing supercritical CO2. J Cell Plast. 2015;48:239–55.


Guo H, Nicolae A, Kumar V. Stable-state microcellular and nanocellular polysulfone foams. J Polym Sci Half B: Polym Phys. 2015;53:975–85.


Gong P, Taniguchi T, Ohshima M. Nanoporous construction of the cell partitions of polycarbonate foams. J Mater Sci. 2014;49:2605–17.


Guo H, Nicolae A, Kumar V. Stable-state microcellular and nanocellular polysulfone foams. J Polym Sci Half B: Polym Phys. 2015;53:975–85.


Gibson LJ, Ashby MF. Mobile solids: construction and properties. Cambridge, UK: Cambridge College Press; 1997.


Ma Z, Zhang G, Yang Q, Shi X, Liu Y. Mechanical and dielectric properties of microcellular polycarbonate foams with unimodal or bimodal cell-size distributions. J Cell Plast. 2014;51:307–27.


Notario B, Pinto J, Rodríguez-Pérez MA. In the direction of a brand new technology of polymeric foams: PMMA nanocellular foams with enhanced bodily properties. Polymer. 2015;63:116–26.

Supply hyperlink

wordpress autoblog

amazon autoblog

affiliate autoblog

wordpress web site

web site improvement

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *